Planar LC SERIES Quick Start Manual

LC Series
LC SERIES
Thank you for choosing Planar's very high-bright LC
QUICK START GUIDE
series embedded LCD monitor family.
Customer Service:
To view online documentation and frequently
asked questions, or to send an email to our
technical support staff, please visit:
http://www.planar.com/support or call
1-866-PLANAR1 (1-866-752-6271).
To receive advanced notifi cation of product
updates, please register your monitor at
www.planar.com/support.
Planar is one of the world's most accomplished
providers of fl at-panel displays, with over 24
years' expertise in fl at-panel innovation. The
company provides the most dependable display
solutions for various applications in industrial,
medical, and commercial markets.
Monitor Set-up Optional Auto Dimming
1. If it is necessary, clean the front surface of The LC17/LC19 is available with optional
the display by using clean, compressed air or auto dimming. This feature allows
by using only a clean, dry soft cloth. the display to automatically adjust its
brightness for optimal viewing at a wide
2. Mount the monitor to your enclosure using range of ambient lighting conditions.
your hardware. Detailed mechanical draw- For additional information please
ings, including mounting hole patterns, view the LC series User Guide at
may be found at: www.planar.com/support.
http://www.planar.com/support
3. Securely tighten all mounting hardware.
4. Connect the video and power cables. The
unit will display a test screen the fi rst time
power is applied without a video signal.
5. Power up the computer.
See the user's guide for your product at
http://www.planar.com/support for
advanced set-up instructions.
Package Overview
Contents -
Touch Controller
USB (Touch Versions)
Europe & NA AC Cord
Video Cable
The test results show that this device meets the FCC rules. Refer to the
US or EU Power Supply product operation manual for FCC classifi cation found at:
http://www.planar.com/support. Those limits are set to protect residential
areas from the devices with harmful emission. This device will produce,
use and radiate radio frequency energy. In addition, failure to follow
the user's manual to install or use this device might produce harmful
interference with radio communication. Notwithstanding the foregoing,
it does not guarantee that this type of harmful interference does not
For best performance, set your computer video
occur in some special installations. The interference caused by this device
graphics resolution to: 1280 x 1024. to the reception of radio or television signals may be verifi ed by turning it
on and off. Any changes or modifi cations to this TFT LCD would void the
user's authority to operate this device.
Important Recycle Instruction -
LCD Lamp(s) inside this
product contain mercury.
This product may contain other
electronic waste that can be
hazardous if not disposed of
properly. Recycle or dispose in ac-
LCD Display DVI-D Cable Power Supply
cordance with local, state, or federal
Laws. For more information, contact
the Electronic Industries
Alliance at WWW.EIAE.ORG. For
lamp specifi c disposal information
S-Video Cable Composite Video Cable
check WWW.LAMPRECYCLE.ORG.
European Union 2002/95/EC Directive on the Restriction
of Hazardous Substances (RoHS)
In February 2003, the European Union issued Directive 2002/95/EC on
the Restriction of Hazardous Substances, commonly known as RoHS,
in certain electrical and electronic equipment. It restricts the use of six
hazardous substances, including lead (Pb). The Directive states that all
new products within its scope, placed on the European market after
July 1, 2006 must be compliant with its requirements.
Planar Systems Inc. is fully in support of and compliant with EU Direc-
tive 2002/95/EC for applicable products within its scope. A Planar part
number will be modifi ed with an "LF" suffi x designation to indicate
RoHS compliance, as shown on the part number label affi xed to the
display and on the box containing the display.
020-0605-00
36.61702G001