Lincoln Electric Aspect 230 DC Operator's Manual page 22

ASPECT ® 230 DC
Hold both Select and Pulse buttons for 5 seconds to enter Menu "SYS."
Then press 'SEL' to cycle through. To change, rotate knob then press 'SEL' to save "A' to exit
Setup Menu "SYS"
Display
VRD Voltage Reduction Device
LED LED Brightness
COOL
CTRL Control Board Software Version
UI User Interface Board Software Version
IC Input Control Board Revision
ERR Error Messages
HR
CNT
RSET Reset to Default
GRN
LOCK Display Lockout
Item
Cooler Control
Arc Time
Arc Counter
Green Mode
5 Seconds
System Settings
Choices Description
ON
Turn ON to enable VRD and limit machine OCV to 12 Volts
OFF
LOW
MED Adjusts the intensity of the display LEDs
HIGH
AUTO
On AUTO, the cooler turns on and off as needed. ON forces
it to run continuously.
ON
- Displays current control board software version
- Displays current UI board software version
- Displays Input Control Board Revision
- Displays error messages (See Troubleshooting Section)
- Displays total welding hours
Displays total number of arc strikes amperage, memory &
-
SYS menu
YES/NO Resets to factory default.
YES/NO Allows the user to enable or disable the green mode
With lockout activated, all settings are frozen except amper-
YES/NO
age control, system menu and memory.
B-10
OPERATION