Installing The Display Driver - Planar Dome E4c Quick Reference Manual

Installing the Display Driver

Before you install the driver, remove any previously installed display driver
for the display controller from your system.
To install the display driver
1 Start your computer system. Click Cancel on the Found New Hardware Wizard.
Click No at the restart prompt.
2 Insert the driver installation CD and click Next.
3 Auto-detection reports the driver version and graphics board(s). Click Next.
4 Click the check box to enable independent mode for each graphics card.
Click Next.
5 Click Next to continue. File copy begins.
6 Click Continue Anyway on the dialog reporting no digital signature.
Repeat for a second graphics card.
7 Click Next upon completion of the driver installation.
8 Select the Restart computer option and click Finish.
To confi gure the display
1 Right-click the desktop and select Properties > Settings.
2 Use the native resolution of the display, 2560x1600.
3 For use of the second display, select Extend my Windows desktop onto
this monitor.
4 Click OK until you return to the desktop.
8