Connecting The Display - Planar Dome E4c Quick Reference Manual

Connecting the Display

Use only the power cord supplied with your display.
To connect the display
1 Plug the DVI cable into the bottom
video port of the installed controller.
(Only the bottom port allows you to
enable dual-link functionality.
Use the bottom port to support the
display with the full, non-scaled
2560 x 1600 resolution.)
2 Plug the power cord into the input
power port on the connector plate.
3 Plug the power cord from the power
adapter into a grounded outlet.
NOTE: The display turns on automatically
when you turn on your computer system.
Connect the
DVI cable to the
DVI
bottom port for
port 1
dual-link functionality.
Connection for
a single display
DVI cable
MX4 board
installed
7