Planar Dome E2 User Manual page 24

Dome E2 Specification
In locations where 240V outlets are used, connect the Dome E2 display to only a center-
tapped, 240V, single-phase supply (only for Canada and the United States).
Category
Screen
Interface
Input formats
Physical
Power
14 | Dome EX Display
Characteristic Item
Screen size diagonal
Resolution
Pixel pitch
Pixel arrangement
Active area (mm)
Grayscale supported
Refresh rate
Contrast ratio
Brightness
Pixel rise/fall time
Viewing angle
Digital Video In
Display control - brightness/
contrast
Display identification
USB hub
Display status
Landscape orientation
Portrait orientation
VGA to XGA/SXGA
Screen type
Display size (without stand)
Display weight (without stand)
Mounting options
Adapter
Specification
498 mm (19.6 in.)
1200 x 1600 pixels (portrait)
1600 x 1200 pixels (landscape)
0.249 mm x 0.249 mm
Subpixel vertical stripe
398.4 (H) x 298.8 (V)
3061 shades of gray
60 Hz
600:1 (typical)
2
900 cd/m (when new)
40 ms (typical)
170° (± 85°) horizontal/vertical
DVI Rev. 1.0 single digital channel connector
DDC2B+
EDID read using DDC2B+
Universal Serial Bus (USB) Rev. 1.1:
1 uplink B port; 2 downlink A ports
Dual-stack tricolor LEDs on back panel
1600 x 1200 (8-bit and 24-bit per pixel)
1200 x 1600 (8-bit and 24-bit per pixel)
640 x 480 to 1024 x 768 in both landscape and
portrait rotations, 1280 x 1024 displayed in
landscape rotation
AMLCD (active matrix liquid crystal display)
440 mm x 343 mm x 95 mm
(17.3 in. x 13.5 in. x 3.75 in.)
5.5 kg (12 lb)
Desktop stand (standard);
100-mm VESA mounting (optional)
Ault MW116KA1249F53 (CAUTION: Use only the
power adapter supplied with the display unit.)