Carrier K Series Installation Instructions Manual page 61

PGR5 Series K: Installation Instructions
Start-Up Checklist
(Remove and Store in Job Files)
I. PRELIMINARY INFORMATION
MODEL NO.: ____________________________________________________________
SERIAL NO.: ____________________________________________________________
DATE: __________________________________________________________________
TECHNICIAN: ___________________________________________________________
II. PRESTART-UP (Insert check mark in box as each item is completed)
( ) VERIFY THAT ALL PACKING MATERIALS HAVE BEEN REMOVED FROM UNIT
( ) REMOVE ALL SHIPPING HOLD DOWN BOLTS AND BRACKETS PER INSTALLATION INSTRUCTIONS
( ) CHECK ALL ELECTRICAL CONNECTIONS AND TERMINALS FOR TIGHTNESS
( ) CHECK GAS PIPING FOR LEAKS (WHERE APPLICABLE)
( ) CHECK THAT INDOOR (EVAPORATOR) AIR FILTER IS CLEAN AND IN PLACE
( ) VERIFY THAT UNIT INSTALLATION IS LEVEL
( ) CHECK FAN WHEEL, AND PROPELLER FOR LOCATION IN HOUSING/ORIFICE AND SETSCREW TIGHTNESS
( ) INSPECT TUBING
III. START-UP
ELECTRICAL
SUPPLY VOLTAGE _______________________________________________________
COMPRESSOR AMPS ____________________________________________________
INDOOR (EVAPORATOR) FAN AMPS _______________________________________
TEMPERATURES
OUTDOOR (CONDENSER) AIR TEMPERATURE __________________________ DB
RETURN-AIR TEMPERATURE__________ DB ___________ WB
COOLING SUPPLY AIR ________________ DB ___________ WB
GAS HEAT SUPPLY AIR __________________________________________________
PRESSURES
GAS INLET PRESSURE ___________________________________________ IN. W.C.
GAS MANIFOLD PRESSURE (HIGH STAGE) ________________________ IN. W.C.
GAS MANIFOLD PRESSURE (LOW STAGE, 208/230 VAC MODELS) _____________IN. W.C.
REFRIGERANT SUCTION____________ PSIG,SUCTION LINE TEMP* ___________________
REFRIGERANT DISCHARGE _________________ PSIG, _______________LIQUID TEMP†
( ) VERIFY REFRIGERANT CHARGE USING CHARGING CHARTS
HIGH STAGE GAS HEAT TEMPERATURE RISE RANGE (See Literature) _________________________
MEASURED TEMPERATURE RISE (HIGH STAGE) ___________________________
LOW STAGE GAS HEAT TEMPERATURE RISE RANGE (208/230 VAC MODELS __________________
MEASURED LOW STAGE TEMPERATURE RISE RANGE (208/230 VAC MODELS _________________
* Measured at suction inlet to compressor
{Measured at liquid line leaving condenser.
© 2023 Carrier. All rights reserved.
Edition Date: 03/23
Catalog No: PGR5-01SI
Replaces: 46201210406
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
61