GE Evolve Troubleshooting & Repair Manual page 8

Evolve™ LED Area Light
Scalable Fixtures (EAS)
Section 3: Power Door Replacement (EASC)
• Cut and strip input leads to Light Engine disconnect at the connectors.
• Allow door to swing back and pivot and lift off of hinges
Hinge pivots
• To install new power door first verify that new power door is of the correct incoming voltage
and fixture wattage. Verify by checking name plate on right hand side of door against the
door just removed.
Troubleshooting
and Repair Guide
(continued)
Hinge pivots