Section 4: Power Door Replacement (Easa/Easb) - GE Evolve Troubleshooting & Repair Manual

Evolve™ LED Area Light
Scalable Fixtures (EAS)

Section 4: Power Door Replacement (EASA/EASB)

• Disconnect and isolate incoming power to the fixture.
• Separate both halves of the Primary disconnect.
• Separate both halves of the Light Engine disconnect.
• Allow door to swing back and pivot, then lift off of hinges.
Hinge
pivots
*Actual shape and color of connectors may vary.
*Actual shape and color of connectors may vary.
Troubleshooting
and Repair Guide
Hinge
pivots