GE CYNC Installation Manual

CYNC Hexagon Panel Installation Guide
Let's Do It
What's
Included:
(10) Light (12) Adhesive
10 Pack
Panels Strips
(9) Adhesive
(7) Light
7 Pack
Panels Strips
5 Pack
(5) Light (6) Adhesive
Expansion
Strips
Panels
Before You Get Started
Important Note: Properly Connect Your Panels.
Read these instructions completely and carefully.
Your Hexagon Panels include two type of ports: Input Ports and Output
Ports. Your linking cables must be properly installed to ensure that each
Hexagon Panel has power. Here's what to know:
Input Ports are identified with an arrow.
Power comes INTO this port. Connect the control box (first panel) or the
linking cable from the previous Hexagon Panel into the port marked with
an arrow.
Output Ports are identified with numbers.
Power LEAVES through this port to provide power to the next Hexagon
Panel in your design. Connect the linking cable to any one of the 5 ports
to power the next Hexagon Panel in the sequence. Select the Output Port
closest to the Input Port on the next Panel.
Panels are connected in sequence. Do not use more than one Output
Port on each Hexagon Panel.
GE is a trademark of General Electric Company. Used under trademark license.
(9) Linking (30) Traceless (10) Layout
Cables Nails Templates
(6) Linking
(21) Traceless (7) Layout
Cables Nails Templates
(5) Linking (15) Traceless (5) Layout
Cables Nails Templates
(2) Control
Control Power
box mounting
Box Adapter
screws
(2) Control
Control Power
box mounting
Box Adapter
screws
Note:
One power adapter can power up to 20 Hexagon Panels. For any pattern
needing more than 20 tiles of Hexagon Panels, you will need to purchase
an additional set with an additional power adapter.
Panel
Orientation
Level
Remover
Tool
Tool
Panel
Orientation
Level
Remover
Tool
Tool
Cleaning
Wipe
Cleaning
Wipe