Related Manuals for GE LED Security Ligh
Summary of Contents for GE LED Security Ligh
- Page 1 MOTION-ACTIVATED LED Security Light User Manual www.jascoproducts.com 1-800-654-8483...
-
Page 2: Parts List
Thank you for purchasing the GE LED Security Light with Motion Activation control. This economical, energy efficient LED light has been de- signed to allow easy installation, flexible mounting options and provide exceptional light output with minimum power consumption. Please read all the Instructions carefully. Keep them for future reference. - Page 3 Questions? Problems? Missing Parts? If you have any questions regarding the installation or operation of the product, Before returning to Retailer, please contact Technical Support at 1-800-654-8483,option 4. WARNING: Turn power off at circuit breaker or fuse box. Do Not rely on a wall switch alone to turn off power.
-
Page 4: Installation
INSTALLATION Select an existing light fixture, either wall or eave mount for replacement. Note: The fixture must be connected to 120v, 60Hz power source. MOUNTING PREPARATION FOR THE LED LIGHT FIXTURE Note: For maximum flexibility, the LED Security Light can be mounted on a wall (vertical) or under the eave (horizontal). -
Page 5: Wire Connection
Locate the adjustment knob and lock nut on the LED fixture. Loosen both and position LED light housings into the approximate position prior to mount- ing. For wall mount, the LED light housings should be positioned above the motion sensor. For under eave mount, position cover housing horizontally so that LED light housings are facing outward, away from the wall and motion sensor is positioned in front of LED light housings. - Page 6 LED light fixture is snug; do not over-tighten. 6. Cover mounting bolt by inserting GE badge into hole; align badge with mounting slots. Press in until snug. 7. If a location junction box was not used, caulk edge of cover housing surface with silicone weather resistant sealant (not included).
- Page 7 ADJUSTING LIGHT HOUSINGS Adjustment Knob 1. Slightly loosen adjustment knob and lock nut for one housing at a time. Gently position LED housing to final desired position. Tighten adjustment knob and lock nut. If necessary, follow same adjusting for the other Light Housing. 2.
- Page 8 MOTION SENSOR POSITION SET-UP Note: The motion detection range has been set to a maximum sensitivity, up to 60ft. This is the optimum, reliable distance. At longer distances, there is a greater tendency for ‘false activations’. Maximum sensitivity distance will vary based on outside conditions (temperature, weather), mounting location and detection angle.
- Page 9 Important Note: (1) Do not point motion sensor toward bright lights or reflective surfaces as this will affect accuracy of the motion sensor. (2) Avoid areas with heavy traffic or pet areas as this may trigger lights consistently. (3) Avoid pointing sensor directly towards severe temperature surfaces such as heating vents, air conditioners, driveway or asphalt surfaces, large light-colored objects that reflect heat, or other light sources.
- Page 10 DUSK/DAWN LIGHT LEVEL ACTIVATION SETTING Time Dark The LED light fixture has an adjustable light level activation setting labeled ‘Dark’. This adjustment allows you to determine when the TEST LED lights will turn on based upon the darkness level outside. In some situations, depending upon on where the fixture is located, you may wish to have the LED lights turn on sooner (example-the LED light fixture is positioned in a shaded area).
- Page 11 ‘movement’. All motion sensors are more sensitive to movement across the detection area, and less sensitive to movement toward the sensor. The Motion Sensor on the GE LED Security Light is designed to detect motion up to 180°, and outward from the fixture from 6ft up to 60ft.
- Page 12 • Consult the dealer or an experienced radio/TV technician for help GE is a trademark of General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114. www.jascoproducts.com...