GE Tetra PowerStrip GEWHSSP3-65K Installation Manual

GE
Lumination
PowerStrip
Tetra
®
LED Lighting System
(GEWHSSP3-65K, GEWWSSP3-41K)
Components
1
6
7
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING/ADVERTISEMENT
Risk of electrical shock. Disconnect power before
servicing or installing product.
Risque de choc électrique. Couper l'alimentation
avant le dépannage ou avant l'installation du produit.
imagination at work
2 3
5
8 9
10
1
UL approved 18 AWG (0.82 mm
4
2
UL approved 22-14 AWG (0.33-2.08 mm
wire connectors or 22-18 AWG
(0.33-0.82 mm
3
#6 or #8 (M3 or M4) screws or 1/8 inch
(3.2 mm) rivets
4
End caps (GETMEC1)
5
®
Tetra Power Supply (GEPS12-20,
GEPS12-60, GEPS12-60U)
6
®
Tetra PowerStrip LED modules
(GEWHSSP3-65K, GEWWSSP3-41K)
OPTIONAL
7
®
Tetra PowerStrip Assembly Support
(GEDSAS1)
8
Tetra ® PowerStrip Tube Connector (GEDSTC1)
9
Tetra ® PowerStrip Assembly End Cap
(GEDSMB1)
10
Tetra ® PowerStrip Tube (GEDSAT96)

Prepare Electrical Wiring

Electrical Requirements

• Do not use in wet locations.
• The grounding and bonding of the LED
Driver shall be done in accordance with
National Electric Code (NEC) Article 600.
• Follow all National Electric Codes (NEC) and
local codes.
Installation Guide
) supply wire
2
) in-line/IDC connectors
2
12
Volt
)
2