Delay start
Memory
Temperature unit
Weight unit
PIN code
WiFi
- Switch off after 20 minutes
- Switch off after 30 minutes
The delay start (timer) display can be switched on or off.
Factory default: on
The washing machine will save the settings (temperature, spin speed
and some of the options) which have been selected for a wash pro-
gramme after the programme has started.
When the wash programme is chosen again, the saved settings will
appear on the washing machine's display.
Factory default: off
You can select the unit for the temperature display.
Factory default: °C/Celsius
You can decide whether load sizes are displayed in "kg" or "lbs".
You can also switch this information off altogether.
Factory default: kg
You can alter the access code to the Supervisor level.
Enter the current code.
Enter a new code.
Control the networking of your washing machine.
- Setup
This message only appears if the washing machine has not yet
been connected to a WiFi network.
- Deactivate (visible when the network is activated)
The network remains set up; the WiFi function is switched off.
- Activate (visible if the network is deactivated)
The WiFi function is reactivated.
- Connection status (visible when the network is activated)
– The quality of WiFi reception
– The network name
– The IP address
- Set up again (visible if already set up)
Resets the WiFi login (network) to immediately re-establish a new
connection.
- Reset (visible if already set up)
The network is no longer set up. A new connection has to be estab-
lished in order to use the network again.
Supervisor level
65