Table of Contents
Advertisement
Connector Box
Electrical connection
The electrical connection must only be carried out by a suitably quali-
fied electrician in accordance with local and national regulations such
as BS 7671 in the UK.
It is recommended to connect the product to the electrical supply
with a suitably rated plug and socket.
A residual current device (RCD) type B (sensitive to universal cur-
rent) must be used if one is being installed.
The electrical components of the machine comply with EN 60335-1,
EN 50571.
The voltage is stated on the data plate.
For hard-wired machines, an all-pole means of deactivation must be
provided on site. Switches with a minimum contact gap greater than
3 mm are suitable disconnectors. These include circuit breakers,
fuses and contactors (VDE 0660).
The plug connector or isolator switch should be easily accessible at
all times.
If the machine is disconnected from the power supply, the discon-
nector must be lockable or the point of disconnection must be mon-
itored at all times.
Preventing hazards
If the mains connection cable for this machine is damaged, it must
be replaced by the manufacturer, the Customer Service Depart-
ment or a similarly qualified person.
Observe the enclosed wiring diagram.
Reference to external machines
A reference to external hardware appears.
Confirm with the OK symbol.
If using a Connector Box, connect it before initial commissioning.
The washing machine must be disconnected from the mains to do
this. Then start the commissioning process.
Optional accessories
Only use genuine Miele spare parts and accessories with this ma-
chine.
Using spare parts or accessories from other manufacturers will in-
validate the warranty, and Miele cannot accept liability.
The Connector Box allows external hardware from Miele and other
suppliers to be connected to the Miele Professional washing ma-
chine.
Installation
67
Advertisement
Table of Contents
