Table of Contents
Advertisement
Levelling the machine
Ensure that the machine feet and the installation surface are dry to
prevent the machine from slipping during the spin cycle.
Incorrect installation may increase water and energy consumption
and may cause the machine to move about.
The four adjustable feet are used to level the washing machine. The
machine is supplied with all feet screwed in.
Using the open spanner supplied, turn the counter nut (2) in a
clockwise direction. Then turn the counter nut (2) together with the
foot (1) to unscrew.
Use a spirit level to check the machine is standing level.
Hold the foot (1) securely with a pipe wrench. Turn the counter
nut (2) again using the open spanner supplied until it sits firmly up
against the casing.
The counter nuts must sit firmly up against the casing. Please also
check this for the feet which did not need adjustment. Otherwise
there is a risk of the washing machine moving about.
Installation
63
Advertisement
Table of Contents
