Table of Contents
Advertisement
Special features in the programme sequence
Dispensing
Washing and
heating
Drain with agita-
tion
Spin
Function combin-
ations
40
If a higher numerical value is set, the values below this will no longer
be displayed.
Press the
Start/Stop
The wash programme will start or continue.
The dispensing quantity for the various dispensing pumps can be set.
This function is only possible if the Connector Box, the dispensing
pumps and automatic dispensing have been selected in the super-
visor level, see "Supervisor level" section.
Press the Dispensing function button.
Select the desired dispensing pump and dispensing quantity, e.g.
D1 50 ml
.
Confirm your selection with the Execute sensor control.
Start/Stop
Press the
The wash programme will start or continue.
Spin speed, rhythm and temperature can be set.
Press the
Washing and heating
Select the desired settings.
The selected setting will appear in orange in the multiple selection.
Confirm your selection with the
Press the
Start/Stop
The wash programme will start or continue.
Drain path, spin speed and rhythm can be set.
Press the
Drain with agitation
Select the desired settings.
The selected setting will appear in orange in the multiple selection.
Confirm your selection with the
The spin speed can be set.
Press the
Spin
function button.
Select the desired value.
Confirm your selection with the
Start/Stop
Press the
The wash programme will start or continue.
Water inlet, dispensing, washing and heating can be selected simul-
taneously in any combination*.
sensor control.
sensor control.
button.
Execute
sensor control.
sensor control.
function button.
Execute
sensor control.
Execute
sensor control.
sensor control.
Advertisement
Table of Contents
