Drives; Drive Positions; Removing And Installing Drives - HP EliteDesk 800 G4 SFF Maintenance And Service Manual

Drives

For a list of available drives, see

Drive positions

Drive positions
1 3.5-inch secondary hard drive bay
2 3.5-inch primary hard drive bay
3 2.5-inch hard drive bay
4 9.5 mm slim optical drive bay
NOTE: The drive configuration on your computer may be different than the drive
configuration shown above.

Removing and installing drives

When installing drives, follow these guidelines:
The primary Serial ATA (SATA) hard drive must be connected to the dark-blue primary SATA connector on
●
the system board labeled SATA0.
Connect secondary hard drives and optical drives to one of the light-blue SATA connectors on the system
●
board labeled SATA1 and SATA2.
30 Chapter 4 Removal and replacement procedures
Computer major components on page 4.