Scene Mode Scheduler - Bosch NDE-8503-R User Manual

34 en | Configuration
Intelligent Defog
With the Intelligent Defog mode feature, visibility can be improved significantly when viewing
foggy or other low-contrast scenes.
–
Note: This option is activated by default on FLEXIDOME IP starlight 8000i camera line which is
capable of automatically activating the Extreme mode when needed.
–
–
Intelligent Dynamic Noise Reduction
Select On to activate intelligent Dynamic Noise Reduction (DNR) which reduces noise based
on motion and light levels.
Sharpness level
The slider adjusts the sharpness level between -15 and +15. The zero position of the slider
corresponds to the factory default level.
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more
detail. Extra sharpness can enhance the details of license plates, facial features and the edges
of certain surfaces but will increase bandwidth requirements.
Temporal noise filtering
Adjusts the Temporal noise filtering level between -15 and +15.
Adjust the balance between noise reduction in a frame over frame averaging way, at the cost
of motion blur. The higher the value the more noise is removed at the cost of more blur in
moving parts of the scene to achieve a lower bitrate and vice-versa for lower values.
The optimum for most scenes is value zero.
Spatial noise filtering
Adjust the Spatial noise filtering level between -15 and +15.
Adjust the balance between noise reduction spatially every frame, at the cost of reduction of
small details. The higher the value the more noise is reduced at the cost of small details to
achieve a lower bitrate and vice versa for lower values.
The optimum for most scenes is value zero.
Intelligent streaming
The sharpness level, Temporal noise filtering and Spatial noise filtering can be automatically
adjusted here, through the encoder, for optimum intelligent streaming results.
Dynamic sharpness & noise filtering
Enable or disable the automatic adjustment of the encoder.
Priority encoder stream
Select stream 1, 2 or Auto as the priority stream for the encoder. Auto automatically selects
the optimal stream.
4.4.8

Scene mode scheduler

The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
2.
3.
To set the Marked range as the single mode of the device, select the complete time range.
The text "Always" will appear after the Marked range menu.
Click Set to apply the changes.
2021-01 | V02 | F.01U.385.211
Select Extreme to activate an Intelligent Defog mode with enhanced defog capabilities.
Select Auto to activate the Intelligent Defog feature automatically as needed.
Select Off to disable the feature.
Select the mode you wish to use during the day from Marked range drop-down box.
Select the mode you wish to use during the night from Unmarked range drop-down box.
Use the two slider buttons to set the Time ranges.
User manual
FLEXIDOME IP starlight 8000i
Bosch Security Systems B.V.