Table of Contents
Advertisement
24
en | Configuration
–
–
–
–
–
Coding standard
Select the encoding mode:
–
–
–
H.265 (no B-frames) is a restrictive mode for the encoder where it only supports I and P
frames. This decreases calculation power so that there can be a higher frame rate (for
example, 30 fps for a camera that might be restricted to 25 fps).
Camera LED
Click the Enabled or Disabled check-box to switch the Camera LED on or off.
Select Auto disable to let the camera determine when the LED should be switched off.
2021-01 | V02 | F.01U.385.211
–
On some browsers, such as Firefox and Chrome, a rectangle can be drawn on the
live video window. The device automatically centers the field of view at the selected
position, levels the horizon and also zooms in.
Image rotation
–
Select the rotation option from the dropdown menu that better suits the device
mounting position. If the camera is mounted in its normal position, select 0º.
–
The 90º - upright and 270º - upright modes switch the aspect ratio from 16:9 to 9:16,
and then is transmitted to its related interfaces. These are optimized for vertical
scenes, such as hallways and perimeters.
Pan/tilt/roll adjustment
–
Use the buttons to adjust the pan, tilt and roll control of the device's field of view.
–
Normally, the horizon automatically levels when the device changes its position. If
necessary, use the roll buttons to manually adjust the horizon.
–
The State field shows if the device is moving or set in the chosen position.
Focus and Zoom Adjustments
–
Use the sliders to adjust the Zoom. The Focus position automatically adjusts to the
Zoom settings and autofocus.
–
Select the Single focus position checkbox if you want to set one focus position for
both day and night positions. If you deselect the checkbox, you can set a new focus
position for day. This function is enabled by default, but for scenes with IR
illumination, focus can be improved by setting an independent focus position for day
time (color) and another for night time (monochrome). It is recommended to setup
the independent focus positions during the related time of day and correct lighting
conditions.
–
The State field shows if the device is moving or set in the chosen position.
–
The Focus indicator shows a value related to the focus quality of the image: the
greater it is, more in focus is the image.
–
Select Autofocus to automatically focus the image.
Focus/view area adjustment
–
Select Set focus area and adjust the corners of the green rectangle. This specifies
the region for which the autofocus function optimizes.
–
Select Set view area and draw a rectangle on the small preview window. The device
automatically changes its field of view to the specified position and related zoom.
Reset
–
A reset to the default position can be necessary for the pan, tilt and roll or optics,
because of eventual loss of calibration or when exposed to extreme vibrations.
–
To reset the pan, tilt and roll angles to their default values, select Reset pan/tilt/roll.
–
To reset the lens to its default values, select Re-initialize autofocus.
H.264
H.265
H.265 (no B-frames)
User manual
FLEXIDOME IP starlight 8000i
Bosch Security Systems B.V.
Advertisement
Table of Contents
