Scene Mode - Bosch NDE-8503-R User Manual

FLEXIDOME IP starlight 8000i
Z [m]
The elevation of the ground plane. To determine the elevation of the camera, add the Z [m]
value and the Height [m] value of the camera.
WGS 84
The WGS 84 coordinate system is a spherical coordinate system description of the world and
used in many standards including GPS.
Latitude
Latitude is the north-south position of the camera in the spherical coordinate system WGS 84.
Longitude
Longitude is the east-west position of the camera in the spherical coordinate system WGS 84.
Ground level [m]
The elevation of the ground above sea level. To determine the elevation of the camera, add the
Ground level [m] value and the Height [m] value of the camera.
Azimuth [°]
The orientation of the camera in a counter-clockwise angle starting with 0° in the east (WGS
84) or on the X-axis (Cartesian). If the camera is directed towards the north (WGS 84) or the
Y-axis (Cartesian), the azimuth is 90°.
Click Set to apply the changes.
4.4.4

Scene mode

A scene mode is a collection of image parameters that are set in the device when that
particular mode is selected (installer menu settings are excluded). Several pre-defined modes
are available for typical scenarios. After a mode has been selected, additional changes can be
made through the user interface.
Current mode
Standard
This mode is optimized for most standard scenes both indoor and outdoor.
Sodium lighting
This mode can be used in applications with street (sodium vapor) lighting. A special white
balance algorithm compensates for the yellow / orange color of the lights.
Fast movement
This mode is used for monitoring fast moving objects like cars in traffic scenes. Motion
artifacts are minimized and the image is optimized for a sharp and detailed picture in color
and monochrome. Due to short shutter speeds, a higher light level is needed to ensure
optimum results.
Sensitivity boost
This mode provides maximum sensitivity in low light scenes by using longer exposure times,
resulting in bright images even in extreme low light. It can introduce motion blur because of
the slow shutter speed.
Dynamic backlight
In this mode Intelligent Auto Exposure is enabled, it automatically optimizes the exposure for
the moving objects in the scene. It's ideal for cameras monitoring an entrance with people
moving in front of a bright background.
Vibrant
This mode provides a more vivid image with increased contrast, sharpness and saturation.
This is at the expense of slightly reduced color accuracy and higher bit-rate.
Bosch Security Systems B.V.
User manual
Configuration | en 29
2021-01 | V02 | F.01U.385.211