Scene Mode - Bosch FLEXIDOME multi 7000i User Manual

26 en | Configuration
4.4.4

Scene mode

A scene mode is a collection of image parameters that are set in the device when that
particular mode is selected (installer menu settings are excluded). Several pre-defined modes
are available for typical scenarios. After a mode has been selected, additional changes can be
made through the user interface.
The scene mode can be selected for each of the four video channels. Each video channel
corresponds to one of the four imagers in the camera.
Current mode
Notice!
i
Some modes might behave differently in single exposure sensor mode and HDR sensor mode.
Standard
This mode is optimized for most standard scenes both indoor and outdoor.
Sodium lighting
This mode can be used in applications with street (sodium vapor) lighting. A special white
balance algorithm compensates for the yellow / orange color of the lights.
Fast movement
This mode is used for monitoring fast moving objects like cars in traffic scenes. Motion
artifacts are minimized and the image is optimized for a sharp and detailed picture in color
and monochrome.
Sensitivity boost
This mode provides maximum sensitivity in low light scenes by using longer exposure times,
resulting in bright images even in extreme low light. It can introduce motion blur because of
the slow shutter speed.
Backlight
In this mode backlight compensation is enabled. It can be used to improve recognition of
people and objects in front of a bright background, for example an entrance of a building.
Vibrant
This mode provides a more vivid image with increased contrast, sharpness and saturation.
This is at the expense of slightly reduced color accuracy and higher bit-rate.
Color only
In this mode the camera will not switch to monochrome mode at low light levels. It can be
used for scenarios where color images are required day and night, like in city surveillance.
Sports and gaming
This mode is for high-speed capture, and improved color rendition and sharpness.
Retail
This mode has improved color rendition and sharpness with reduced bandwidth requirements.
Mode ID
The name of the selected mode is displayed.
Copy mode to
Select the mode from the drop-down menu to which you wish to copy the active mode.
Restore Mode Defaults
Click Restore Mode Defaults to restore the factory default modes.
2021-04 | 01 |
FLEXIDOME multi 7000i | FLEXIDOME multi 7000i
User manual
IR
Bosch Security Systems B.V.