Friedrich Kuhl KCL36 Installation And Operation Manual page 35

Hide thumbs Also See for Kuhl KCL36:

Table of Contents

J.3 Control Panel Operation

The TM Menu

This is the TM menu used to set a timer. See Figure J.3.12.

In the menu, you set the current time using the arrow buttons. See Figure J.3.13.

(Note: These two "set clock" steps will be skipped if the unit is already connected

to Wi-Fi.)

First, set the hour.

Figure

J.3.12

Figure

J.3.13

Figure

J.3.14

Figure

J.3.15

J. STARTUP AND OPERATION

Using the button, you switch to the minutes and complete setting the

time. See Figure J.3.14.

You select your mode. Either cool, heat, or auto. Toggle these using the

arrow buttons. See Figure J.3.15. (Note: cooling-only models skip this

step.)

The process is the same for all three modes. Auto mode will be shown as

the example.

Table of Contents

Kuhl khs10