Table of Contents
Advertisement
8 Operating Procedures
Unplug the electrical connectors by pulling
them straight out from the receptacles. Do not
twist the connectors. Twisting will damage the
connector pins or the wiring harness.
Place dust caps on connectors to prevent
contamination.
Disconnect Plugs
Back inside the truck, return control of the
headlights to the truck and switch power off on
the snowplow control box, then slowly back the
truck out from the plow.
Turn Off Lights and Power
NOTE:
The
stop
fall forward as soon as the lift cylinder is
fully extended for raising the blade prior to
transporting the plow.
If the snowplow won't be used for an extended
period of time, the prong weldment can be
removed from the truck by removing the hex
bolts that fasten it to the truck mount frame.
DWG NO. 6698
DWG NO. 4164
plate
will
automatically
Advertisement
Table of Contents
