Procontractor Series Pump - Graco DutyMax DH230 HD Operation, Parts

ProContractor Series Pump

2. Slowly pull engine starter rope until
pump rod pin hole is aligned with
hydraulic rod hole. Push pin into hole.
Push retaining ring into groove.
3. Fill packing nut with Graco TSL.
34
ProContractor
Series Pump
Removal
See pump manual 334654 for pump repair.
1. Flush pump.
2. Perform Pressure Relief Procedure,
page 15.
3. Remove paint hose fitting and paint hose
from pump fitting.
ti18418a
ti8828a
334606J