Setup; Change Engine Or Motor - Graco DutyMax DH230 HD Operation, Parts

Setup

Setup

Change Engine or Motor

1 Turn motor OFF and unplug or turn
engine to the OFF/STOP position.
Loosen belt guard knob and motor
clamp. Perform Pressure Relief
Procedure, page 15.
16
2 Lift belt guard. Remove belt. Tilt
engine/motor and remove
engine/motor.
ti18192a
3 Tilt engine/motor. Install engine/motor.
Install belt. Lower belt guard.
4 Swivel motor clamp. Tighten motor
clamp and belt guard knob.
ti5387a
ti18193a
ti5389a
334606J