Table of Contents
Advertisement
Controls and functions
Modes of operation of the MusicCAST client
The MusicCAST client has three modes of operation.
• STANDBY:
The MusicCAST client is connected to an AC outlet with STANDBY/ON on its top
surface in the STANDBY position (fully up).
• SLEEP:
The MusicCAST client is connected to an AC outlet with STANDBY/ON on its top
surface in the ON position (fully down), the POWER indicator on its front panel lit, and
the time displaying on its front panel display.
• ON:
The MusicCAST client is connected to an AC outlet with STANDBY/ON on its top
surface in the ON position (fully down), the POWER indicator on its front panel lit, and
information other than the time displaying on its front panel display.
I To turn the MusicCAST client on from
STANDBY mode
1.
Press STANDBY/ON.
The MusicCAST client turns on, displaying its
startup screen, then displays the Top Menu
screen.
Top Menu
Play
Recall Play
Edit Bookmark
Setup
Input
2.
The MusicCAST client attempts to
connect to the MusicCAST server,
displaying the following screen:
Top Menu
Play
Connecting. . .
Input
3.
If it is able to make a connection, the
MusicCAST client returns to the Top
Menu screen, displaying the network
connection icon in the top right corner
of the screen.
If it is not able to make a connecting, the
MusicCAST client continues displaying
the "Connecting..." message. Press any
of the controls on the MusicCAST client
to erase this message, and check the
MusicCAST client network connection
settings.
Note
• If you do not use the MusicCAST client for 30
minutes, it automatically places itself in sleep
mode. Press SELECT or SLEEP to reactivate it.
14
Advertisement
Table of Contents
