Use Musiccast Controller To Connect To A Network - Yamaha MusicCast 200 Owner's Manual

Use MusicCast Controller to connect to a network

1
Download the dedicated MusicCast Controller app to your
mobile device on the App Store or Google Play.
2
Follow the app's on-screen instructions to configure network
settings.
Follow the app's on-screen instructions and
press CONNECT for at least five seconds.
See the following when connecting to a network without using the MusicCast Controller app.
− Wired network connection ( p. 43)
− Using Wi-Fi Protected Setup (WPS) to connect to a network ( p. 44)
− Using iPhone settings to connect to a network ( p. 45)
After connecting to a network using one of the methods described above, download and
install the MusicCast Controller app to your mobile device and follow the instructions at left to
enable simple operation of the unit from your mobile device.
For more information on Internet connections, refer to the documentation provided with your
network devices.
Security software installed on your computer or network device settings (firewall, etc.) may
prevent the unit from accessing your computer or Internet radio stations. If this occurs, modify
security software or network device settings to permit access by the unit.
Important notice regarding information security
Visit the website shown below for details.
https://manual.yamaha.com/av/policy/mcc/
11
Preparation