Updating The Musiccast Client Firmware - Yamaha MusicCAT MCX-A10 Owner's Manual

Updating the MusicCAST client firmware

At times Yamaha releases updates to the firmware
in either or both the MusicCAST client and server.
These updates are generally aimed at improving the
experience of using your MusicCAST equipment.
Follow the instructions provided with the update
carefully. Do not use the update procedure unless
specifically instructed to do so.
The procedure for updating the firmware is as
follows:
DIGITAL AUDIO TERMINAL MCX–A10
ON
TIMER
PUSH
SELECT
MENU
PLAY INFO.
– VOL +
PHONES
1.
Place the update CD in the disc tray in
your MusicCAST server.
2.
Update the firmware on your
MusicCAST server if necessary (see
page 128 of the MCX-1000 owner's
manual).
3.
Press and hold MENU for two seconds
to return to the Top Menu screen.
Top Menu
Play
MENU
Recall Play
Edit Bookmark
Setup
Input
4.
Use u / d to move the cursor to "Setup"
and press SELECT.
The Setup screen appears on the display.
Setup
OFF Timer
ON Timer
SELECT
Auto Play
Auto Level Control
Contrast
5.
Use u / d to move the cursor to
"System" and press SELECT.
The System screen appears on the display.
System
Information
System Update
SELECT
System Reset
OFF TIMER SLEEP
ON TIMER REPEAT RANDOM
I 2 3
PAUSE
4 5 6
MENU
STOP
7
PLAY
S
PLAY
MENU
INFO.
PLAY
GROUP GROUP
SELECT
BOOK INPUT
MARK
RECALL MUTE
VOL
u / d
SELECT
6.
Use u / d to move the cursor to
"System Update" and press SELECT.
The System Update prompt appears on the
display.
SELECT
7.
Press PLAY to begin the update
process.
The following screens appear in order:
System Update
Receiving...
System Update
Data Check...
System Update
Flash Erase...
System Update
Flash Write...
System Update
Verify...
System Update
Update O.K.
65
System settings
System Update
Version:
Date:
Press PLAY to update.