Operation; Turning The Power On - Yamaha R-N2000A Quick Manual

2 OPERATION

2-1

Turning the power on

Turn the product on.
1
Put the z (Power) switch in the up position to turn the power on.
The power indicator lights up.
Power indicator
z (Power) switch
2
After the following message appears on the front display, press RETURN on the front panel to clear the
message.
It may take about 30 seconds for the message to appear. The portion shown as * differs depending on the
device.
-10 -0 +6 PURE DIRECT
W/8
0 100
UDNESS SELECT
PUSH - ENTER PRESET
FLAT
-30dB
RETURN
CONNECT
Wireless WAC Display
The WAC (Wireless Accessory Configuration) function is for applying the wireless settings of an iOS device to
another device and wirelessly connecting to the network. Because it is explained on a later page how to
connect to networks with the MusicCast Controller app, how to cancel WAC is explained here.
METER INPUT
PHONES SPEAKERS
PEAK
OFF VU
DIMMER
YPAO MIC
*
VOLUME
RETURN
CONNECT
-50 -40
POWER 0
BAS
7