York Fitness 45065 Owner's Manual page 15

Folding for storage
Step 1
• Start with bench in ab board position with or without
flye arms fitted
• Remove leg attachment
• Remove pull pin (T-6)
• Fold front leg backward until reaches main tube
B-2
T-7
T-21
T-6
E-1
Step 3
• Refit handwheel (B-2) and bolt (T-7)
(NOTE: You will need to lift the rear
upholstery to fit bolt)
• Interlock flye arms as rotating them inwards
(NOTE: You may find it easier to lay
bench down to do this)
www.yorkfitness.com
T-6
Step 2
• Lower bench to the ground
• Refit pull pin (T-6) to top of front leg
• Refit support tube (E-1) into Incline 3 hole of main upright
ensuring it also passes through locking hole in front leg
• Refit pull pin (T-21) to support tube (E-1)
Step 4
• Slot flye handles inwards
to complete process
15