Coaxial (Good) - Insignia NS-24DR220CA18 User Manual

NS-24DR220NA18 / NS-24DR220CA18

Coaxial (good)

On your TV
Coaxial cable
connector
ANT/CABLE IN
jack
1 Make sure that your TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the coaxial out jack
on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Set up the TV tuner to watch broadcast TV.
6 On the Home screen, press
Notes
20
Back of TV
or to highlight the Antenna TV tile, then press OK.
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
www.insigniaproducts.com
Cable
wall jack
Coaxial cable
Cable or
satellite box