Coaxial (Good) - Insignia NS-39DR510CA17 User Manual

NS-39DR510NA17 / NS-39DR510CA17

Coaxial (good)

On your TV
Coaxial cable
connector
ANT / CABLE IN
jack
1 Make sure that your TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT / CABLE IN jack on the back of your TV and to the coaxial out jack
on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Set up the TV tuner to watch broadcast TV. See
6 On the Home screen, press
Notes
22
or to highlight the Antenna TV tile, then press OK.
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
www.insigniaproducts.com
Cable
wall jack
Back of TV
Setting up Antenna TV
Cable or
satellite box
Coaxial cable
on page 46.