Advertisement
Quick Links
QUICK SETUP GUIDE
19"/24" 720p
60Hz LED TV
NS-19D310NA21 / NS-24D310NA21
ACCESSORIES
Remote control and two AAA batteries
TV stands
M3 screws (14 mm length) (2 pcs.)
STOP
Before using your new product, please read
these instructions to prevent any damage.
Do not plug your power cord in until all
other devices have been connected.
INSTALLING THE STANDS OR A WALL MOUNT
1
Place your TV face-down on a cushioned, clean surface.
STANDS
1 Align the TV stand screw holes with the holes on your TV's bottom.
2 Use a Phillips screwdriver and the two provided screws to secure the stands to your TV.
M3 screw
(14 mm length)
FEATURES
19" 24"
19" TV shown
Remote control
Power/Input button
sensor
Press to turn your TV on or off manually.
When your TV is on, a short press changes
inputs and a long press turns off your TV.
Note: Images do not necessarily represent the exact design of your television.
19" TV shown
M3 screw (14 mm length)
MAKING CONNECTIONS
2
HDMI
(best video quality)
AV
(good video quality)
AUDIO/VIDEO OUT
WALL MOUNT
Before you mount your TV, make sure that:
• You remove the stands.
• The wall-mount bracket supports the weight of your TV.
See the instructions that came with your wall mount for more information
about how to correctly mount your TV.
WARNING: Your TV has four VESA mounting holes on the back. You must secure a wall-mount
bracket to all four holes. If you do not use all four holes, your TV may fall and cause property
damage or personal injury.
Note: Wall-mount screws are not included.
19"
24"
19" TV shown
DIGITAL AUDIO
DIGITAL COAXIAL
OUTPUT
DIGITAL
COAXIAL
AUDIO OUT
INTPUT
ANALOG AUDIO
L
R
HDMI
AUDIO IN
OPTIONS
Coaxial
(good video quality)
VIDEO
L
R
- AUDIO -
AV IN
ANT/CABLE
VESA Mounting Pattern
75 × 75 mm
Screws: type M4, 10 mm minimum
length depending on the wall-mount.
VESA Mounting Pattern
100 × 100 mm
Screws: type M4, 10 mm minimum
length depending on the wall-mount.
You can use the DIGITAL
COAXIAL OUTPUT jack or
the HDMI1 (ARC) jack.
Note: If you need to change
the digital audio format:
From your TV's Audio menu,
SOUNDBAR
select Audio Format/Audio
Delay, then press ENTER.
Set Audio Format to PCM.
SOUNDBAR
HD
HD
Connect an antenna to access
live over-the-air TV.
Advertisement
Related Manuals for Insignia NS-19D310NA21
Summary of Contents for Insignia NS-19D310NA21
- Page 1 75 × 75 mm Screws: type M4, 10 mm minimum M3 screw length depending on the wall-mount. (14 mm length) NS-19D310NA21 / NS-24D310NA21 VESA Mounting Pattern 24" 100 × 100 mm M3 screw (14 mm length) Screws: type M4, 10 mm minimum ACCESSORIES 19"...
- Page 2 Sets the sleep timer. PICTURE Selects the video mode. U.S. and Canada: Media controls 4 Follow the on-screen instructions. INSIGNIA is a trademark of Best Buy and its affiliated AUDIO INlink: Control HDMI-CEC companies. Selects the audio mode. devices connected to Registered in some countries.
Need help?
Do you have a question about the NS-19D310NA21 and is the answer not in the manual?
Questions and answers
I have sound on my TV, but no picture. It is connected to a cable box. How do I determine if the problem is with the TV? I haven't had any success contacting the cable company yet.
To determine if the Insignia NS-19D310NA21 TV is the source of the issue when there is sound but no picture, follow these steps:
1. Check if the TV’s screen shows any backlight glow when powered on. If it stays completely dark, the backlight may be faulty.
2. Try using the TV menu button. If the on-screen menu does not appear, the display panel or main board may be defective.
3. Test with different input sources (HDMI, AV, antenna) to rule out external device issues.
4. Shine a flashlight on the screen at an angle. If you can faintly see images, the backlight is likely the problem.
These steps help isolate whether the issue is with the TV’s display system.
This answer is automatically generated
Code for insignia model 19d31ona21
The document lists several remote control codes but does not specify which one is for the Insignia model NS-19D310NA21. For an up-to-date list of codes, visit www.insigniaproducts.com/remotecodes.
This answer is automatically generated
would like step by step instructions on how to add external speakers for a ns-19d310na21T.V.
The Insignia NS-19D310NA21 TV has built-in speakers located at the bottom facing down. To connect external speakers, you need to use the available audio output ports, such as the headphone jack or RCA outputs if provided. Connect the external speakers to the appropriate port and adjust the TV’s audio settings if necessary.
This answer is automatically generated