Table of Contents
Advertisement
Installation
3.2.2 Ground Mount (optional)
ATTENTION
- Ensure the grounded base is strong enough to hold the weight of the inverter.
Grounded Bracket kit is an optional part, please contact the customer service
center for the detail.
1. Fix the grounded brackets to the bottom of the inverter as Figure 3-10.
2. Mount the inverter with grounded brackets to the ground-mounting base by
4 expansion bolts as Figure 3-11.
* Screw torque required for assembling: 24.5 N•m
Figure 3-10 : Lock the grounded brackets to foots
26
Advertisement
Table of Contents
