Table of Contents
Advertisement
Operating the appliance
en
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
To switch the appliance on or off, touch the
button.
After the appliance has switched off, the display shows
whether the residual heat in the cooking compartment
is high or low.
Display
Residual heat high
Residual heat low
Notes
Certain indicators and instructions (e.g. about
■
residual heat in the cooking compartment) remain
visible on the display even when the appliance is
switched off.
After the appliance has completed an operation, you
■
will hear the cooling fan continuing to run until the
cooking compartment is cooled as much as
possible.
Switch off your appliance when you do not need to
■
use it. If no settings are made for a long time, the
appliance switches off automatically.
Setting and starting the appliance operation
Example: CircoTherm hot air
Touch the
touch button to switch on the
#
1.
appliance.
You are taken directly to the
of heating.
Use the
or
button to select the type of heating.
(
)
2.
Use the
button to navigate to the next line.
&
3.
14
touch
#
Temperature
above 120 °C
between 60 °C und 120 °C
at 170 °C
‚
menu for the types
¢
Use the
or
button to select the temperature.
(
)
4.
Note: Depending on the operating mode, different
settings are available. For each further setting, use
the
&
button to navigate to the next line. Use the
or
button to select the setting.
)
Touch the
touch button to start the appliance
#
5.
operation.
The heating bar and run time appear on the display.
Note: If you would like to go directly to the
menu after switching on the appliance, you can select
the main menu under "Operation after switching on" in
the basic settings chapter.
Default values
The appliance suggests a temperature or setting for
each type of heating. You can accept this value or
change it in the appropriate area.
Heating bar
As soon as a type of heating has started, the heating
bar appears on the display.The heating bar shows the
temperature increase in the cooking compartment.
Run time
When a type of heating has been started, the run time is
displayed. The run time counts upwards during the
operation. You can therefore check how long the
operation has already been running.
Displaying the current temperature
To show the current temperature on the display, press
the
touch button.
!
The current temperature is shown briefly only when
heating up.
Further information
If the
touch button lights up, information can be
!
displayed. Touch the
!
information is displayed for a few seconds.
0
main
touch button to do this. The
(
Advertisement
Table of Contents
