Table of Contents
Advertisement
Description of the device
Features
With DC 24V function
MIC x 5, AUX x 3 and EMC inputs x 2
Volume control and tone controls
Built-in chime, muting and priority function
High S/N ratio
Front panel
1)
AC LED
Indicates that AC power is connected and the device is turned on. The LED will dim if the mains
power fails.
2)
DC LED
Indicates that an external 24Vdc power supply is present.
3) MIC 1 input
This input has a priority function. If the IPS-MPA detects a signal at the MIC 1 input, it mutes all other
inputs.
4) MIC 1 - 5 level
Use to adjust the input level for MIC 1-5.
5)
Aux 1 – 3 level
Use to adjust the input level for AUX 1-3.
6)
Bass
Use to adjust the treble frequencies for each channel to your preference.
7) Treble
Use to adjust the treble frequencies for each channel to your preference.
8) Chime
Use to adjust the chime level.
9) Chime button.
Activates the Chime circuit.
10) AC Power Switch.
This is the main Power switch. Press to turn the amplifier on.
4
Fig. 1
Advertisement
Table of Contents
