Advertisement

Quick Links

MANUAL
ENGLISH
PA-250
V1
Ordercode: D6160
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands

Advertisement

Table of Contents
loading

Summary of Contents for DAPAudio PA-250

  • Page 1 MANUAL ENGLISH PA-250 Ordercode: D6160 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
  • Page 2: Table Of Contents

    PA-500 Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Connection with the mains............................4 Return Procedure ................................4 Claims ....................................4 Description of the device ..............................5 Frontside..................................5 Backside ..................................6 Installation ................................... 7 Set Up and Operation ...............................
  • Page 3: Warning

    Save the carton and all packing materials. In the event that a device must be returned to the factory, it is important that the device is returned in the original factory box and packing. Your shipment includes: DAP Audio PA-250 • Power cable (1,5 m) •...
  • Page 4 PA-500 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system. Never let the power cord come into contact with other cables! Handle the power cord and all •...
  • Page 5: Operating Determinations

    PA-500 Operating Determinations This system is not designed for permanent operation. Consistent operation breaks will ensure that the system will serve you for a long time without defects. If this system is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes void.
  • Page 6: Description Of The Device

    Description of the device Features The DAP PA-250 is a 250W, 100V plain amplifier. It is a reliable workhorse that can be used for many applications. Inputs can be connected with terminals, balanced XLR or unbalanced RCA connectors. The loop through is available to connect external audio processing, like equalizing enhancing or feedback killers.
  • Page 7: Backside

    Connect the device to the appropriate power supply. AC selector Before connecting your PA-250 to the mains, make sure that the AC selector is set to the proper voltage which is used in your country. In case of doubt, consult a technician.
  • Page 8: Installation

    The attenuators should always be turned down during power-up. Connecting Inputs Use the XLR input connector on the rear to supply audio signals to your DAP Audio PA-250 amplifier. The RCA connectors accept unbalanced audio connections while the XLR connector accepts balanced audio connections.
  • Page 9: Connecting Outputs

    PA-500 Connecting Outputs Speakers are connected by means of terminal connectors. See the examples below. Low Impedance Outputs You can use as many speakers as you want as long as the total impedance matches the amplifiers output. Example 1: Using the 8Ω output with an 8Ω speaker. Fig.
  • Page 10: Connection Cables

    PA-500 Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
  • Page 11: Maintenance

    PA-500 Maintenance The DAP Audio PA-250 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.
  • Page 12: Product Specifications

    PA-500 Product Specifications Power consumption: 250W • 100V & 8Ω: Terminals • Line input: RCA, XLR & terminals • • Loop through: RCA Headphones: 6,3 mm jack • Inputs 1 x Line: RCA, XLR & terminals • General Power supply: 230V AC, 50 Hz •...
  • Page 13: Notes

    PA-500 Notes Ordercode: D6160...
  • Page 14 PA-500 Ordercode: D6160...
  • Page 15 PA-500 Ordercode: D6160...
  • Page 16 ©2016 DAP Audio...

This manual is also suitable for:

Pa-500D6160

Table of Contents