Page 2
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio IPS-PMA brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products.
DAP Audio DAP Audio IPS-PMA Guide Warning................................Safety-instructions..........................Operating Determinations......................... Connecting to the mains........................Description................................ Features..............................Overview Front panel......................... Overview Back panel......................... Operation................................Connecting the device........................Connecting cables..........................Maintenance..............................Troubleshooting..............................Product Specifications.............................
WARNING CAUTION! Keep this system away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this system have to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
Please read this manual carefully and keep it for future reference. Remember that the amplifier has a better value on the market, if you save the carton and all packing materials. Always operate the unit with the AC ground wire connected to the electrical system ground. Connecting amplifier outputs to oscilloscopes or other test equipment, while the amplifier is in bridged mode, may damage both the amplifier and test equipment.
Description of the device Features With DC 24V function MIC x 5, AUX x 3 and EMC inputs x 2 Volume control and tone controls Built-in chime, muting and priority function High S/N ratio Front panel Fig. 1 AC LED Indicates that AC power is connected and the device is turned on.
Rear panel Fig. 2 11) AC Inlet with integrated fuse holder. This connector is meant for the connection of the supplied main cord. Connect one end of the power cord to the connector, the other end to the mains, then turn on the power switch to operate the unit.
Operation Installation Remove all packing materials from the IPS-PMA. Check that all foam and plastic padding is removed. Secure the equipment into a 19" rack. Connect all cables. Connecting the device Below an example of a possible setup. NOTE: Always turn off and disconnect the amplifier from mains voltage before making any connections.
Connection Cables Take care of the connector cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability, which is always to your advantage. Periodically check that your cables are in good condition, that they are correctly wired and that all their contacts are in good condition: a great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
Maintenance The DAP Audio IPS-PMA requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.