Danfoss iC7 Series Installation Manual page 8
In-back/out-back cooling kit for fk11/fb11 and fk12/fb12, frequency converters
Hide thumbs
Also See for iC7 Series:
- Application manual (382 pages) ,
- Design manual (224 pages) ,
- Operating manual (82 pages)
Advertisement
In-back/Out-back Cooling Kit for FK11/FB11 and FK12/FB12
Installation Guide
5.
When all bolts are installed, torque to 19 Nm (169 in-lb).
1
2
Illustration 6: Pedestal-to-Cabinet Mounting Points
1
Cabinet
2
Pedestal
6.
Torque the 2 M10 nuts at the rear of the cabinet to 19 Nm (169 in-lb).
8 | Danfoss A/S © 2022.08
3
3
M10x30 fasteners (rear corner bolts not shown)
AN361429087579en-000101 / 136R0289
Installation
Advertisement
Need help?
Do you have a question about the iC7 Series and is the answer not in the manual?
Questions and answers