Danfoss iC7 Series Installation Manual page 6

Pedestal Kit for FK09/FB09 and FK10/FB10
Installation Guide
a. Slide the cable entry plate through the pedestal front opening.
b.
Insert the cable entry plate through the frequency converter cabinet angling the plate until it slides into position.
3. Align the studs on the cable entry plate with the holes in the pedestal and secure with 8 M5 nuts.
4.
Attach the pedestal side panels with 8 M5x14 countersunk screws, 4 in each panel.
5. Attach the front cover to the pedestal by securing 4 M5x14 countersunk screws.
1
2
Illustration 4: Cable Entry Plate and Pedestal
1 Cable entry plate
2 Front cover
6 | Danfoss A/S © 2022.03
3 Side panel
4 M5 x14 countersunk screw
AN371942906358en-000101 / 136R0256
Installation
3
4