Omega OO640X Instruction Manual page 8

INSTALLATION OF BUILT-IN OVEN
Installation Instructions
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE.
Insert the oven into cabinet partly by pushing it forward. Open the oven door and insert 2 screws into the holes on
the oven frame. While the product frame touches the wooden surface of the cabinet, tighten the screws.
It is important that you retain these instructions, proof of purchase as well as other important
If the oven is installed below a built-in hob, the distance between the worktop and the top panel of the oven must
documents about this product for future reference.
be a minimum of 50mm, and the distance between the worktop and the top of the oven control panel must be a
The manufacturer will not be responsible for any damage to property or to persons caused by
INSTALLATION OF BUILT-IN OVEN
minimum of 25mm. The front of the oven will remain in front of the cabinet.
incorrect installation or improper use of the appliance.
Insert the oven into cabinet partly by pushing it forward. Open the oven door and insert 2 screws into the holes on
The dimensions and material of the cabinet in which the oven will be installed must be correct and resistant to
the oven frame. While the product frame touches the wooden surface of the cabinet, tighten the screws.
increases in temperature. In a correct installation, contact with electrical or insulated parts must be prevented.
Due to continual product development, Omega reserves the right to alter specifications and appearances
If the oven is installed below a built-in hob, the distance between the worktop and the top panel of the oven must
Insulating parts need to be fitted in a way to ensure that they cannot be removed by using any kind of tool.
INSTALLATION OF BUILT-IN OVEN
without notice.
be a minimum of 50mm, and the distance between the worktop and the top of the oven control panel must be a
Insert the oven into cabinet partly by pushing it forward. Open the oven door and insert 2 screws into the holes on
Installing the appliance in the close vicinity of a refrigerator or a deep-freezer is not recommended as the
the oven frame. While the product frame touches the wooden surface of the cabinet, tighten the screws.
minimum of 25mm. The front of the oven will remain in front of the cabinet.
Contents
performance of the above-mentioned appliances will be negatively affected due to emanating heat. After removing
If the oven is installed below a built-in hob, the distance between the worktop and the top panel of the oven must
The dimensions and material of the cabinet in which the oven will be installed must be correct and resistant to
your oven from its packaging, be sure that the oven is not damaged. If you suspect any damage to the appliance,
be a minimum of 50mm, and the distance between the worktop and the top of the oven control panel must be a
increases in temperature. In a correct installation, contact with electrical or insulated parts must be prevented.
minimum of 25mm. The front of the oven will remain in front of the cabinet.
do not use it; immediately contact an authorised Service Centre.
Insulating parts need to be fitted in a way to ensure that they cannot be removed by using any kind of tool.
The dimensions and material of the cabinet in which the oven will be installed must be correct and resistant to
Installing the appliance in the close vicinity of a refrigerator or a deep-freezer is not recommended as the
increases in temperature. In a correct installation, contact with electrical or insulated parts must be prevented.
Insulating parts need to be fitted in a way to ensure that they cannot be removed by using any kind of tool.
performance of the above-mentioned appliances will be negatively affected due to emanating heat. After removing
Important Safety Warnings ............................................................................................................................................ 1-3
Installing the appliance in the close vicinity of a refrigerator or a deep-freezer is not recommended as the
your oven from its packaging, be sure that the oven is not damaged. If you suspect any damage to the appliance,
performance of the above-mentioned appliances will be negatively affected due to emanating heat. After removing
Product Information .......................................................................................................................................................... 4
do not use it; immediately contact an authorised Service Centre.
your oven from its packaging, be sure that the oven is not damaged. If you suspect any damage to the appliance,
Technical Data ................................................................................................................................................................... 5
do not use it; immediately contact an authorised Service Centre.
Accessories ........................................................................................................................................................................ 6
Installation Instructions................................................................................................................................................ 7-11
Operating Instructions ............................................................................................................................................... 12-18
Maintenance and Cleaning ........................................................................................................................................ 19-20
Troubleshooting .............................................................................................................................................................. 21
Australian & New Zealand Product Warranty Statements of Standard Warranty Conditions ....................................... 22
Disposal Information
• Most of the packaging materials are recyclable. Please dispose of these materials through your local
recycling depot or by placing them into appropriate collection containers.
• If you wish to discard this product, please contact your local authorities and ask for the correct
method of disposal.
INSTALLATION IN AN ELEVATED CABINET
INSTALLATION IN AN ELEVATED CABINET
INSTALLATION IN AN ELEVATED CABINET
8
8