Gree SUPER FREE MATCH Series Service Manual page 52

Super Free Match
Service Manual
by 1 minute. Holding down either button rapidly changes the time setting by 1 minute and then 10 minutes.
Within 5 seconds after setting, press TIMER ON button to confirm.
8) TIMER OFF
Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button
again. TIMER OFF setting is the same as TIMER ON.
9) CLOCK
Pressing CLOCK button
Holding down either button above 2 seconds increases or decreases the time by 1 minute every 0.5 second and
then by 10 minutes every 0.5 second. During blinking after setting, press CLOCK button again to confirm the
setting, and then
10) X-FAN
Pressing X-FAN button in COOL or DRY mode, the icon
operation for 10 minutes in order to dry the indoor unit even though you have turned off the unit. After
energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
Note: X-FAN is the alternative expression of BLOW for the purpose of understanding.
11) TEMP
Press this button, could select displaying the indoor setting temperature or indoor ambient temperature. When
the indoor unit firstly power on it will display the setting temperature, ambient temperature, 5s later or within 5s,
it receives other remote controller signal that if the temperature's displaying status is changed from other status
to" ", displays the will return to display the setting temperature. if the users haven't set up the temperature
displaying status, that will display the setting temperature.
12) TURBO
Press this button to activate/deactivate the Turbo function which enables the unit to reach the preset
temperature in the shortest time. In COOL mode, the unit will blow strong cooling air at super high fan speed. In
HEAT mode, the unit will blow strong heating air at super high fan speed. (This function is not applicable for
some models).
13) SLEEP
Press this button to go into the SLEEP operation mode. Press it again to cancel this function. This function is
available in COOL, HEAT (Only for models with heating function) or DRY mode to maintain the most
comfortable temperature for you.
14) LIGHT
Press LIGHT button to turn on the display's light and press this button again to turn off the display's light. If
the light is turned on,
3.5.2 Introduction for special Operation
1) Child lock function
Press ＋ and － buttons simultaneously can turn on or turn off child lock function. When child lock
function is started up, "
times, while remote controller won't send signal.
2) Switchover function for temperature display
After turning off the unit by remote controller, press "-" button and "MODE" button simultaneously to switch
between and °F .
℃
CONTROL 46
blinks. Within 5 seconds, pressing ＋ or － button adjusts the present time.
will be constantly displayed.
is displayed. If the light is turned off,
"icon will be displayed on it. If operate remote controller, "
is displayed and the indoor fan will continue
disappears.
" icon will flash three