Parts And Components - WAGNER CONTROL PRO 170 Owner's Manual

pArtS AnD CoMponEntS

150 / 170
1
5
6
2
7
3
4
4
PRIME
SPRAY
SPRAY
PRIME
# ItEM
1 Tool box
2 Pressure control knob /
ON/OFF switch
3 Spray hose port
4 PRIME/SPRAY knob
5 Suction tube
6 Material return tube
7 Inlet filter
8 Spray gun
9 Tip guard
10 Spray tip
11 Hose restraint
12 Spray hose
13 Pusher stem
8
8
10
9
DESCrIptIon
The Tool Box provides a place for items such as extra spray tips or wrenches.
The pressure control knob regulates the amount of force the pump uses to push the fluid and can be
adjusted for desired spray pattern. Also used to switch the pump ON / OFF.
The connection between the pump and the spray hose.
The PRIME/SPRAY knob directs material to the material return tube when set to PRIME or to spray hose
when set to SPRAY.
The suction tube draws the fluid from the original container into the pump.
Fluid is sent out through the return tube and back into the original container when the PRIME/SPRAY
knob is in the PRIME position.
The inlet filter is designed to prevent any debris that may be in the spray material from entering the pump.
The spray gun controls the delivery of the material being pumped.
The spray guard reduces the risk of injection injury.
The spray tip atomizes the spray material and forms the spray pattern.
This retains the hose for easier use and storage.
The spray hose connects the spray gun to the pump.
The pusher stem is designed to free the inlet valve which may become stuck due to dried materials. The
pusher stem is activated manually by the user.
190
1
5
6
2
7
3
4
12
11
En
13