Table of Contents
Advertisement
Maximum final spin speed
The maximum final spin speed will
depend on the programme chosen.
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that permitted for the
programme selected.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed.
To omit the final spin (Rinse hold)
^ Select Rinse hold from the Extras
sub-menu. The laundry will not be
spun and will remain suspended in
the final rinse water. This reduces
creasing if the laundry is not going to
be removed from the drum immedi-
ately after the end of the programme.
– To start the final spin:
The Spin speed is highlighted in the
display.
– Start the final spin by pressing the
Start button.
– You can alter the spin speed.
^ Press the multi-function selector and
change the spin speed shown.
^ Then confirm your choice. The spin
will start straight away.
– To end the programme:
^ Press short cut button G Cancel.
The water will drain away.
^ Open the drum door.
To omit the spin between rinses and
the final spin
^ Select Without spin from the Spin
speed sub-menu . The water will be
pumped away after the last rinse
cycle.
Spinning
31
Advertisement
Table of Contents
