Plumbing; Connection To The Cold Water Supply - Miele PW 6080 Vario Operating And Installation Instructions

Hide thumbs Also See for PW 6080 Vario:
Table of Contents

Advertisement

Installation

Plumbing

This machine is approved for all UK
applications as suitable for category 5.
The product is listed in the WRAS
regulations advisory scheme directory
and is suitable for direct connection to
mains drinking water. No special
plumbing arrangements e.g. break
tanks are required.
Three Water Council approved double
check valves are supplied in the
accessories pack provided with this
machine. They should be fitted in
between the stopcocks and the water
inlet hoses.
The machine is built in accordance with
current DIN standards and must be
connected to a mains water supply in
accordance with local and national
safety regulations. It can be connected
without a non-return valve if national
regulations permit
The machine is designed to operate
with a flow pressure of between 1 and
10 bar (100 kPa and 1,000 kPa). At
higher water pressures it is essential to
fit a reducer valve.
Connection to the water supply should
be carried out by a qualified plumber
and should incorporate a stopcock with
a 3/4" thread. The stopcock should be
fitted by a qualified plumber.
The machine is supplied as standard
with two hoses, for connection to a hot
and cold water supply.
58

Connection to the cold water supply

The cold water inlet hose (blue
stripes) must be connected to the
on-site cold water supply via a 3/4"
threaded union. It is not suitable for
connection to a hot water supply.
,
The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
Maintenance and care
Only use a genuine Miele hose should
you ever need a replacement. Miele
hoses are tested to withstand pressure
of at least 70 bar (7,000 kPa).
In order to protect the water inlet
valve, the two dirt filters - one in the
open end of the inlet hose, one at
the inlet point in the machine - must
not be removed.
Extension hose
Longer hoses 2.5 or 4.0 m in length are
available from your Miele dealer or the
Miele Spare Parts Department as
optional extras.

Advertisement

Table of Contents
loading

Table of Contents