Table of Contents
Advertisement
Timer
To open the Timer sub-menu
To select a delay start time
To start the timer
To cancel the timer
30
The timer can be used to select the time you want the
programme to finish. The start of a programme can be
delayed from 30 minutes up to a maximum of 24 hours,
Cottons Uni.
Duration 0:53 h
Extras
Timer Y
H
^ Press short cut button E below the word Timer. This
opens the Timer sub-menu.
You can enter the end time for a programme in 30 minute
stages.
Cottons Uni.
10:03
^ Use the multi-function selector to select the programme
end time and confirm your selection.
The programme end time will be adjusted to the next full or
half hour.
The start of the programme will now be delayed in parallel
with the programme end time you have selected.
^ Press the Start button.
The delay start time will be shown counting down in minutes.
^ Press short cut button G.
The actual load size can only be determined accurately by
the machine once the programme has started. This can
cause the finish time for the programme to vary.
60°C
H
60°C
Start time:
Finish:
1300 rpm
Back A
H
1300 rpm
10:38
11:30
Advertisement
Table of Contents
