Spinning - Miele WEK 365 Operating Instructions Manual

Final spin speed in wash pro-
grammes
When a programme is selected, the
sensor control for the optimum spin
speed for that programme will be
brightly lit up in the control field.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is in-
dicated in the table.
Programme
ECO 40-60
Cottons
Minimum iron
Delicates
Woollens 
Dark garments/Denim
QuickPowerWash
Express 20
Shirts
Proofing
Drain/Spin
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the in-
terim spin speed. If a spin speed of less
than 700 rpm is selected for the Cot-
tons programme, an additional rinse is
introduced.
Selecting Rinse hold (final spin)
 Touch the  sensor control (Rinse
hold).
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps to prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
Ending a programme with a spin cycle
The sensor control for the optimum spin
rpm
speed lights up on the control field. You
1400
can change the spin speed.
1400
 Touch the Start/Add laundry sensor
1200
control.
900
Ending a programme without a spin
1200
cycle
1200
 Reduce the spin speed to 0.
1400
 Touch the Start/Add laundry sensor
1200
control.
900
To omit rinse and interim spin
1200
and the final spin
1400
 Touch the  sensor.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.

Spinning

31