Healthrider HREVEX83914.0 User Manual page 9

6. Tip: Avoid pinching the wires. Orient the
Upright (27) as shown, and hold it on the
Frame (50).
Attach the Upright (27) with four M8 x 20mm
Screws (29).
7. Locate the lower end of the wire tie in the Upright
(27). Tie the wire tie to the Main Wire (25). Then,
pull the upper end of the wire tie until the Main
Wire is routed through the Upright and out of the
indicated hole. Make sure that the Extension
Wire (70) remains in the Upright (27).
Tip: To prevent the Main Wire (25) from falling
into the Upright (27), secure the Main Wire
with the wire tie.
6
Avoid pinching
the wires
7
9
27
29
50
Wire
Hole
Tie
27
Wire
Tie
70
25