Healthrider HREVEX83914.0 User Manual page 7

2. Using a standard screwdriver, remove the
Shield Cover (26) from the Left and Right
Shields (37, 58).
If there are shipping tubes (not shown) attached
to the front and rear of the Frame (50), remove
and discard the shipping tubes and the hardware
attaching them.
Set a sturdy piece of packing material under the
rear of the Frame (50). Have a second person
hold the Frame to prevent it from tipping
while you complete this step.
Identify the Rear Stabilizer (44), which has a
handle.
Attach the Rear Stabilizer (44) to the Frame (50)
with two M8 x 70mm Screws (46).
Remove the packing material from under the
rear of the Frame (50).
3. Set a sturdy piece of packing material under the
front of the Frame (50).
Attach the Front Stabilizer (63) to the Frame (50)
with two M8 x 70mm Screws (46).
Remove the packing material from under the
front of the Frame (50).
2
37, 58
44
46
3
7
26
50
46
63
50