Status Indication - Advantech SmartStart SL302 User Manual

5.8.1 Status indication

There are three LED indicators on the front panel to provide router status information. The
ETH port has two additional LEDs that provide information about the port status.
Caption Color State
PWR Green Blinking
On
Fast blinking.
DAT Red Blinking
WAN Yellow Fades out 1x/5 s
Fades out 1x/2 s
Fades out 1x/1 s
ETH Green On
Off
ETH Yellow On
Blinking
Off
The status indication of the WAN LED is updated every 10 seconds.
1
Or the difference between neighbouring cells is exactly 3 dBm.
2
Or the difference between neighbouring cells is smaller than 3 dBm.
SmartStart SL302
Description
Router is ready.
Starting of the router.
Updating firmware.
Communication in progress on the radio channel.
Signal strength is good.
Signal strength is fair
Signal strength is poor
For value ranges of signal strength see Configuration
manual, chapter Mobile WAN Status.
Selected 100 Mbps.
Selected 10 Mbps.
The network cable is connected.
Data transmission.
The network cable is not connected.
Table 5: Status indication
17
1
.
2
.