Danfoss iC7 Series Installation Manual page 3

Ground Bar Kit for FK11/FB11 and FK12/FB12
Installation Guide
3. Repeat for remaining ground bar and angle bracket.
nd
Position the 2 ground bar with the long end oriented in the opposite direction on the bracket. When correctly assem-
bled, the 2 ground bars mirror each other.
1
2
3
4
5
6
Illustration 1: Assembly of Ground Bars and Angle Brackets
1 M6 hex nut
2 Ground bar assembly for mains side
3 Angle bracket
4 M5x18 mm screw
Danfoss A/S © 2022.10
5 Side view of assembled ground bar and bracket
6 Front view of assembled ground bar and brack-
et
7 Ground bar assembly for motor side
8 End view of assembled ground bar and bracket
AN422349925420en-000101 / 136R0287 | 3
Installation
7
8